2 pieces available
working days- Delivered by
Mopar 68163848AB antifreeze coolant is the original fluid designed to provide maximum protection and reliability for all engines belonging to the FCA group, including RAM, Jeep, Dodge, Chrysler, Fiat and Alfa Romeo. It is a high-efficiency ethylene glycol-based product, conforming to the MS-90032 standard, intended for the latest generation of engines and also suitable for aluminum cooling systems.
With an OAT (Organic Additive Technology) formulation, this antifreeze is designed to offer long service life, high resistance to temperature changes and excellent corrosion protection, contributing to the optimal maintenance of the engine and sensitive mechanical components.
Product code: Mopar 68163848AB
OEM standard: MS-90032
Format: 3.78-liter canister (1 US gallon)
Typology: concentrated antifreeze to dilute
Protection temperature: -37°C to +129°C
Life: up to 10 years or 240,000 km (if diluted properly)
Formula: embittered (bittered for added safety)
Color: purple/deep pink
Condition: new, original Mopar
Mopar coolant MS-90032 is designed to last, retaining its anti-corrosive and protective properties even years later. When diluted properly with distilled water, it provides protection for up to ten years or 240,000 km. Its action helps prevent oxidation and buildup of deposits in the cooling system passages, improving the life of the water pump, radiator, thermostat and all seals involved.
His wide operating temperature range, from -37°C to +129°C, allows the engine to work at full efficiency in extreme winter conditions as well as in hot climates or under severe thermal stress, such as heavy towing or off-road use.
Mopar coolant 68163848AB was developed to be fully compatible with all FCA group vehicles that require the MS-90032 standard. Major models include:
RAM 1500 DS 5.7 V8 HEMI Classic (2013 - 2023)
RAM 1500 DT 5.7 V8 HEMI (2019 - ongoing)
Also compatible with numerous Jeep, Dodge, Chrysler, Fiat, Alfa Romeo, SRT models
Before use, it is always recommended to check compatibility with your vehicle through the maintenance booklet.
Being a concentrated product, it requires dilution before use. The recommended ratio is 50% antifreeze and 50% distilled water, but can be adjusted according to environmental conditions. The mixture provides a perfect balance between frost protection, high boiling point and controlled electrical conductivity, protecting both aluminum and cast iron surfaces.
The liquid should be replaced according to the intervals specified by the manufacturer. In case of frequent topping up or abnormal level variation, an inspection of the system by an authorized workshop is recommended.
The embittered version includes a bittering additive, which is useful in discouraging accidental ingestion by children and pets. The product should not be released into the environment and should be disposed of according to local regulations for toxic liquids.
Mopar 68163848AB MS-90032 coolant is the ideal choice for keeping the engine cooling system efficient and protected. Manufactured to the manufacturer's technical specifications, it ensures perfect compatibility, extended service life, protection from high and low temperatures, and maximum reliability in even the most demanding engines such as the 5.7L V8 HEMI fitted to RAM 1500s.
Original Mopar product
You can pay for your order with credit cards or prepaid, PayPal, Bank Transfer in advance. The choice of payment method to be used is made at the time of order checkout. In case of Bank Transfer, sending the receipt of payment via WhatsApp or email allows you to faster order processing.
Delivery times are always indicated in the product sheet or quote and may vary depending on the warehouse from which the goods are sourced.
Delivery timelines include import and subsequent delivery by domestic courier. Only after a careful verification of the integrity of the products, carried out at our warehouse, will the package be entrusted to one of the major express couriers for final delivery.
Domestic deliveries take place within 24/48 hours (72 for islands or isolated areas) from when the goods leave our Italian warehouse.
You can check the status of the shipment on the dedicated page that was sent to you via email.
If you have doubts about the compatibility of the product, by providing us with the VIN chassis number of your vehicle before placing your order, our team will verify whether the product is appropriate for the vehicle in question and send you a photo of the part identified so that you can verify that it is correct.
If the product is still not found to be compatible despite our verifications, we will guarantee all assistance in finding the appropriate solution at our expense (replacement, reinstatement, return and refund).
You can request invoice conveniently at the time of checkout by entering Tax Code, VAT Number and SDI or PEC code. You can also request an invoice only on Tax Code. The invoice will be sent electronically by the end of the month in which the goods were delivered.
In the case of orders confirmed and paid for in one month but delivered in the next month, you will receive an initial down payment invoice (with the amount of the payment made) by the end of the month of payment and then receive a balance invoice (with the amount at zero) by the end of the month in which the order was completed. This procedure is necessary for correct VAT settlement.
If you do not want an invoice, the transaction will be recorded as consideration and you will not be able to request an invoice later.
The goods you receive will not be subject to any additional charges and/or customs fees as all customs procedures and any charges are handled and paid entirely by us. You will receive a invoice with VAT from a company with Italian VAT number.
All products we commercialize are covered by the warranty for conformity defects in accordance with Legislative Decree 206/05 of 24 months to private consumers (natural person who buys the goods for purposes not related to his professional activity, that is, he makes the purchase without indicating in the order form a reference of VAT). For more information, please read the General Terms and Conditions.
They are also covered by the manufacturer's conventional warranty. For more information, please consult the websites of the respective manufacturers.
.No. Normally, no pickups can be made from our premises.
Goods are shipped via national express courier, unless exceptions are indicated by us (fragile and/or bulky material).
Of course! Delivery can be made anywhere you prefer.
If you have made arrangements with your mechanic, we can ship directly to the workshop of choice. Remember to enter the correct shipping address at checkout.
Our team will take care to make sure that your order is delivered to where indicated.
Malfunctions, issues, and related return procedures are managed by one of our technicians providing assistance to identify the problem and seek a solution.
If a return is necessary you will be instructed on the correct return procedure either by phone or email.
A refund, if any, will be issued as soon as we have received your shipment at our returns center. Once we have verified the integrity and conformity of the original packaging, the refund will be issued on the same payment method used at checkout.
If you have confirmed your order by bank transfer in advance, please let us know the IBAN where you would like to receive the refund.
If you have chosen Bank Transfer as payment method, the order will be processed from the moment we receive the receipt of payment.
The status of the order will remain in "to be paid" until the amount transferred is actually accounted for in our systems (usually in 2-4 days).
For further clarification Contact one of our representatives.
